Installing OS X El Capitan Using Unibeast: A Step-by-Step Guide

Are you ready to install OS X El Capitan on your Asrock computer using Unibeast? This process can seem daunting, but with the right guidance, it's easier than you think. In this article, we will walk you through each step of the installation process.

Before we begin, make sure you have a USB drive that is at least 8GB in size and an ISO file of OS X El Capitan Legacy version. If you don't have one, create a bootable USB drive by following these steps:

First, click on 'Options' and then choose 'GUID Partition Table.' Name the partition 'OS,' and select 'Mac OS Extended Journaled.' Click 'Apply' to complete the process.

Next, choose the hard drive where you want to install OS X El Capitan. Click 'Partition' and then select '1 partition.' Make sure to select the correct hard drive to avoid any issues during the installation process.

Once you have completed these steps, go to Utilities and then choose Disk Utility. Select the 'CAPITAN' partition and press Enter to boot into the installation process.

Wait for your computer to restart, and let it boot from the USB drive. Make sure that you have set the first boot device as the USB drive in the BIOS settings. To do this, enter the BIOS by turning on your computer while pressing the 'Delete' key several times.

In the BIOS settings, make sure that all the settings are set to 'Performance Default.' Also, enable 'No memory execute' to ensure a successful installation process.

Next, connect the USB drive you created earlier to your Asrock computer. Run Unibeast and select the USB drive along with the option OS X El Capitan Legacy version. Then, click 'Install' to begin the installation process.

During the installation process, you will be prompted to select the language and keyboard layout for your new operating system. Follow these prompts to complete the installation.

Once the installation is complete, restart your computer and boot into OS X El Capitan. You can do this by selecting the correct hard drive in the BIOS settings and setting it as the first boot device.

That's it! With these steps, you should be able to successfully install OS X El Capitan using Unibeast on your Asrock computer. Remember to be patient during the installation process, as it may take some time to complete.

Before you begin installing OS X El Capitan, make sure that you have a backup of all your important files and data. This is because the installation process will erase all data on the USB drive.

Unibeast install os x el capitan